AVRO CF101 & CF105 Pneumatic Angle Drill – a 90 degree offset angle drill solution for aerospace and sheet-metal work.
Pneumatic angle drill model CF101 & CF105, with a 90 degree configuration for working in limited spaces.
Designed for professional use in the angle drill category, with air connection and pressure data as stated by the manufacturer.
| Model | Speed | Spindle | Blade | Length (C) | Length | Weight | Image |
|---|---|---|---|---|---|---|---|
| 12408 | 3,000 | 1/4-28 | 4.8 / 122 | 10.3 / 261 | 1.8/ 0.8 |  | |
| 12409 | 3,000 | 1/4-28 | 6.14 / 156 | 11.3 / 296 | 2.0/ 0.9 | ||
| 12410 | 3,000 | 1/4-28 | 7.5 / 190 | 13.0/330 | 2.1 / 0.95 | ||
| 12428 | 2,400 | 1/4-28 | 4.8 / 122 | 10.8 / 274 | 2.1/ 0.95 | ||
| 12429 | 2,400 | 1/4-28 | 6.14 / 156 | 12.1 / 308 | 2.3/ 1.04 | ||
| 12430 | 2,400 | 1/4-28 | 7.5 / 190 | 13.5 / 343 | 2.5 / 1.13 |
Standard Output 1/4-28
Add Suffix to model ex:12,408 A
A=9831-40
What is this pneumatic angle drill suitable for?
For professional aerospace and sheet-metal work, especially where a 90 degree configuration is needed.
What is the air inlet on this model?
The air inlet is 1/4” NPT Standard.
What air pressure does the manufacturer specify?
The specified air pressure is 90 psi (620 KPA).
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Pneumatic Angle Drill - AVRO CF101 & CF105.
The right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.