The GB740 is a heavy-duty, high-speed pneumatic-hydraulic production tool for blind rivets.
The GB740 is a heavy-duty, high-speed pneumatic-hydraulic production tool for blind rivets.
The GB740 is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind rivets. It weighs 6.50 lbs. (2.95 kg) and can be operated in any position. It has a 1.330” (33.78 mm) fastener setting stroke and a rated pull load of 2,400 lbs. (10.7 kN) with 90 psi (6.2 bar) of air pressure at the air inlet. The GB740 installation tool operates on 90 to 100 psi (6.2 – 6.9 bar) of air pressure, with 90 psi (6.2 bar) providing the maximum efficiency. At 90 psi (6.2 bar), the GB740 does not exceed 81.5 dB(A) and consumes 0.30 SCF/cycle (8.50 L/cycle). The air inlet is provided with 1/4 – 18 female pipe thread to accept the users air hose fitting.
The GB740 is a heavy-duty, high-speed production tool for blind rivets.
| Weight | 6.50 lbs. (2.95 kg) |
|---|---|
| Rated Pull Load | 2,400 lbs. (10.7 kN) |
| Stroke | 1.330” (33.78 mm) |
| Width | 6.17 (156.7 mm) |
| Noise Level | less than 81.5 dB(A) |
| Warranty | 1 year |
| DIA. | STRAIGHT | RIGHT ANGLE | OFFSET |
|---|---|---|---|
| 1/8 | 4C-740B-52 | 4C-715A-54RA 1, 2 | 4C-715A-40OS 1 |
| 5/32 | 5C-740B-52 | 5C-715A-54RA 1, 2 | 5C-715-40OS 1 |
| 3/16 | 6C-740B-52 | 6C-715A-54RA 1, 2 | 6C-715-40OS 1 |
| 1/4 | 8C-740B-52 |
| DIA. | STRAIGHT | RIGHT ANGLE | OFFSET |
|---|---|---|---|
| 1/8 | 4A-740B-52 | 4A-715A-54RA 1, 2 | 4A-715-40OS 1 |
| 5/32 | 5A-740B-52 | 5A-715A-54RA 1, 2 | 5A-715-40OS 1 |
| 3/16 | 6A-740B-52 | 6A-715A-54RA 1, 2 | 6A-715-40OS 1 |
| 1/4 | 8A-740B-52 |
| DIA. | STRAIGHT | OFFSET |
|---|---|---|
| 1/8 | 4C-640-64 | 4C-640A-50 |
| 5/32 | 5C-640-64 | 5C-640A-50 |
| 3/16 | 6C-640-64 | 6C-640A-50 |
| 1/4 | 8C-640-64 | 8C-640A-50 |
| DIA. | STRAIGHT | RIGHT ANGLE | OFFSET |
|---|---|---|---|
| 8/32 | GS8-715B-43 1 | GS8-715A-54RA 1, 2 | GS8-715A-40OS 1 |
| GB740 installs the listed fasteners | |
|---|---|
| 1) REQUIRES 740715 ADAPTER. | |
| 2) RIGHT ANGLE NOSE ASSEMBLIES MAY REQUIRE MORE THAN 1 PULL. | |
| 3) 1/4 DIAMETER ALUMINUM & MONEL ONLY. | |
| 4) THRU 3/16 DIAMETER ONLY. | |
| *ALL COUNTERSUNK 'C' NOSE ASSEMBLIES MAY BE USED TO INSTALL BOTH UNIVERSAL AND COUNTERSUNK HEAD RIVETS. | |
| NOTE : NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -52 = 5.2 INCHES |
| Image | Model | Compatibility | |
|---|---|---|---|
 | 45A-740B-52 | Recommended | |
 | 45U-740B-52 | Recommended | |
 | 4A-740B-52 | Recommended | |
 | 4C-640A-50 | Recommended | |
 | 4U-640A-50 | Recommended | |
 | 5A-740B-52 | Recommended | |
 | 5C-640A-50 | Recommended | |
 | 5U-640A-50 | Recommended | |
 | 640A-50 | Recommended | |
 | 68C-740B-52 | Recommended | |
 | 6A-740B-52 | Recommended | |
 | 6C-640A-50 | Recommended | |
 | 6C-740B-52 | Recommended | |
 | 6U-640A-50 | Recommended | |
 | 8A-715A-54RA | Recommended | |
 | 8A-740B-52 | Recommended | |
 | 8C-640A-50 | Recommended | |
 | 8C-740B-52 | Recommended | |
 | 8U-640A-50 | Recommended | |
 | GS10-740C-52 | Recommended |
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Gage Bilt Pneudraulic Rivet Tool GB740.
The right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.