Gage Bilt Pneudraulic Rivet Tool GB713

The GB713 is a pneumatic-hydraulic installation tool for blind rivets and lockbolt fasteners.

Overview

The GB713 is a pneumatic-hydraulic installation tool for blind rivets and lockbolt fasteners.

Product information and applications

Description

The GB713 is a pneumatic-hydraulic tool designed specifically for the efficient installation of blind rivets. It weighs 6.50 lbs. (2.9 kg) and can be operated in any position. It has a 0.760" (19.3 mm) fastener setting stroke and a rated pull load of 4,500 lbs. (20.0 kN) with 90 psi (6.2 bar) air pressure at the air inlet. The GB713 installation tool operates on 90 – 100 psi (6.2 – 6.9 bar) of air pressure, with 90 psi (6.2 bar) providing the maximum efficiency. At 90 psi (6.2 bar) of air pressure, the GB713 does not exceed 81.5 dB(A) and consumes 0.30 SCF/cycle (8.50 L/cycle). The air inlet is provided with 1/4 – 18 female pipe thread to accept the users air hose fitting.

Additional product details

The GB713SH and GB713SR variants use a split configuration that reduces handheld weight; the GB713SH includes an 8 ft (2.4 m) hose and the GB713SR includes a 3 ft (1 m) hose.

Specifications and compatibility tables

GB713 Info:

Weight6.50 lbs. (2.9 kg)
Rated Pull Load4,500 lbs. (20.0 kN)
Stroke0.760" (19.3 mm)
Width7.88 (200.1 mm)
Noise Level81.5 dB(A)
Warranty1 year

COMMERCIAL LOCKBOLT, C6L, AVDELOK

DIA.STRAIGHT
3/16LB06-722-20 LB06-722-60
1/4LB08-722-20 LB08-722-60

MAGNA-GRIP MULTI-GRIP, MAXLOK LOCKBOLTS

DIA.STRAIGHT
3/16MG06-722-20 MG06-722-60
1/4MG08-722-20 MG08-722-60

MS90353S & U / MS90354S & U MS21140S & U / MS21141S & U MAXI-BOLT, BACB30YY, YU, & YT CR7000 SERIES BLIND BOLT (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
1/8SB04-752C-20 SB04-752C-45SB04-751C-54RA 4SB04-752B-43OS
5/32SB05-752C-20 SB05-752C-45 SB05-752C-80SB05-751C-54RA 4SB05-752A-43OS
3/16SB06-752B-20 SB06-752B-45 SB06-752B-80SB06-751B-54RA 4SB06-27OSSG SB06-37OSSG
1/4SB08-713-20 3 SB08-713-45 3SB08-713A-58RA 3SB08-27OSSG 3 SB08-37OSSG 3

MS90353S & U / MS90354S & U MS21140S & U / MS21141S & U MAXI-BOLT, BACB30YY, YU, & YT CR7000 SERIES BLIND BOLT (SINGLE ACTION) WITH DRIVE WASHER

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
1/8UBB04-752C-20 UBB04-752C-45UBB04-751C-54RA 4UBB04-752B-43OS
5/32UBB05-752C-20 UBB05-752C-45 UBB05-752C-80UBB05-751C-54RAUBB05-752B-43OS
3/16UBB06-752B-20 UBB06-752B-45 UBB06-752B-80UBB06-751B-54RAUBB06-27OSSG UBB06-37OSSG
1/4UBB08-713-20 3 UBB08-713-45 3UBB08-713A-58RA 3UBB08-27OSSG 3 UBB08-37OSSG 3

EN6122 & UAB130-EU EN6127 & UAB6127-EU EN6128 & UAB100-EU EN6129 & UABP-EU MAXIBOLT PLUS

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
5/32UAB568-713-21 5 UAB568-713-61 5
3/16UAB06-751B-54RA 4UAB06-752B-43OS
1/4UAB08-27OSSG UAB08-37OSSG

NAS1900 S & U SERIES UNIMATIC BLIND RIVET (SINGLE ACTION) WITH OR W/OUT DRIVE WASHER

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
1/8SMLS04-752C-20 SMLS04-752C-45SMLS04-751C-54RA 4SMLS04-752B-43OS
5/32SMLS05-752C-20 SMLS05-752C-45SMLS05-751C-54RA 4SMLS05-752B-43OS
3/16SMLS06-752B-20 SMLS06-752B-45SMLS06-751C-54RA 4SMLS06-752B-43OS
1/4SMLS08-713-20SMLS08-713B-58RASMLS08-27OSSG SMLS08-37OSSG

NAS1900 S & U SERIES UNIMATIC BLIND RIVET (SINGLE ACTION) WITH DRIVE WASHER

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
1/8
5/32456UBR-751A-21 1 456UBR-751A-61 1456UBR-751D-54RA 1,4456MAX-731-43OS 1
3/16
1/4UBR08-713-20 UBR08-713-45UBR08-713B-58RAUBR08-27OSSG UBR08-37OSSG

"A" CODE NAS1398A, NAS1399A NAS1738A, NAS1739A

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
3/323A-352B-253A-751B-54RA 4
1/84A-752C-20 4A-752C-454A-751C-54RA 44A-752B-43OS
5/325A-752C-20 5A-752C-455A-751C-54RA 45A-752B-43OS
3/166A-752B-20 6A-752B-456A-751C-54RA 46A-752B-43OS
1/4SMLS08-713-20SMLS08-713B-58RASMLS08-27OSSG SMLS08-37OSSG

T RIVET

DIA.STRAIGHT
3/166T-352-21 6T-352-61
1/48T-352-21 8T-352-61

"A" CODE NAS1398A, NAS1399A NAS1738A, NAS1739A

DIA.STRAIGHT*RIGHT ANGLE
3/16MGL06-752A-21 MGL06-752A-61MGL06-713B-58RA
1/4MGL08-752A-21 MGL08-752A-61MGL08-713B-58RA

MONOBOLT

DIA.STRAIGHT
3/16MB06-752A-21 MB06-752A-61
1/4MB08-752A-21 MB08-752A-61

CONTAINER BOLT(R 12) HLPP, HLPM, HLPE, HLPS HLPSC & HLPSM

DIA.STRAIGHT
3/8HT12-713-20

TLR RIVET

DIA.STRAIGHT
1/48TLR-352-21 8TLR-352-61

CHERRYMAX, CHERRYMAX 'AB', (FOR 1/4" ALUMINUM CHERRYMAX 'AB' USE SMLS08) MBC LOCK CREATOR BACR15FR/FP, BACR15GF/GK

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
1/8456MAX-751-23 1 456MAX-751A-61 1456MAX-751D-54RA 1,4456MAX-731-43OS 1
5/32
3/16
1/408MAX-752B-20 08MAX-752B-4508MAX-713A-58RA08MAX-27OSSG 08MAX-37OSSG

ASP ASP 2, ASP PF, ASP 2 F, ASP 2 LC, ASP 4 FF, ASP FF, ASP F, ASP-LC and MAF

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
13/64ASP06-752C-20 ASP06-752C-45ASP06-751B-54RA 4ASP06-752B-43OS
17/64ASP08-752B-20 ASP08-752B-45ASP08-752B-43OS
21/64ASP10-713-20 ASP10-713-45ASP10-27OSSG ASP10-37OSSG

STANDARD MBC NAS1719, NAS1720 NAS1721

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
1/8MBC04-752C-20 MBC04-752C-45MBC04-751C-54RA 4MBC04-752C-43OS
5/32MBC05-752C-20 MBC05-752C-45MBC05-751C-54RA 4MBC05-752C-43OS
3/16MBC06-752B-20 MBC06-752B-45MBC06-751C-54RA 4MBC06-752C-43OS

MBC LOCK CREATOR NAS1719X(L), NAS1720X(L) NAS1721X(L)

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
1/8456MAX-751-23 1 456MAX-751A-61 1456MAX-751D-54RA 1,4456MAX-731-43OS 1
5/32
3/16

GROUND STUD, M83454 BACS53B

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
8/32GS8-752C-20 GS8-752C-45GS8-751C-54RA 4GS8-752B-43OS
10/32GS10-752B-20 GS10-752B-45GS10-752A-54RA 4GS10-752B-43OS

MILLIMETER PLUG SEAL

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
4 mm5N-751-23 5N-352-6145N-751B-54RA 45N-751A-43OS
5 mm6N-751-23 6N-352-616N-751C-54RA 46N-751A-43OS

POP OPEN END NAIL RIVET

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
5/325N-751-23 5N-352-6145N-751B-54RA 45N-751A-43OS
3/166N-751-23 6N-352-616N-751C-54RA 46N-751A-43OS
1/48CN-713-21 8CN-713-618N-713A-58RA

POP CLOSED END NAIL RIVET (ALUMINUM MANDREL)

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
5/325CEA-751-23 5CEA-352-615CEA-751B-54RA 45CEA-751-43OS
3/166CEA-751-23 6CEA-352-616CEA-751C-54RA 46CEA-751-43OS

POP CLOSED END NAIL RIVET (STEEL MANDREL)

DIA.STRAIGHT*RIGHT ANGLE*OFFSET
5/325CES-751-23 5CES-352-615CES-751B-54RA 45CES-751-43OS
3/166CES-751-23 6CES-352-616CES-751C-54RA 46CES-751-43OS
1/48CES-713A-58RA

FOOTNOTES

GB713 installs the listed fasteners
*ALL "OSSG" SERIES NOSES REQUIRE 713206 ADAPTER (NO STROKE LIMITER REQUIRED). OPTIONAL 751206-1 ADAPTER & 713159 STROKE LIMITER
1) INSTALLS 1/8", 5/32" AND 3/16" DIAMETERS.
2) ALUMINUM ONLY.
3) 105 P.S.I. REQUIRED FOR MS90353 & MS90354.
4) THESE NOSES REQUIRE 713153 STROKE LIMITER.
5) INSTALLS 5/32", 3/16", AND 1/4"
NOTE : THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES

Compatible nose assemblies

ImageModelCompatibilityPDF
3C-751-43OSAlternatePDF
3C-751A-43OSAlternatePDF
4C-751-43OSAlternatePDF
4C-751A-43OSAlternatePDF
5C-751-43OSAlternatePDF
5CES-751A-43OSAlternatePDF
68MB-352-21AlternatePDF
68N-352-21AlternatePDF
68N-713-21AlternatePDF
6BS-204E-37OSAlternatePDF
6C-751-23AlternatePDF
6C-751-43OSAlternatePDF
6C-751A-43OSAlternatePDF
6N-713-21AlternatePDF
6P-713-21AlternatePDF
6T-713-21AlternatePDF
8AVP-751-54RAAlternatePDF
8C-751-43OSAlternatePDF
8C-751A-43OSAlternatePDF
8CES-713-21AlternatePDF
8CN-713-21AlternatePDF
8CN-713-61AlternatePDF
8P-713-21AlternatePDF
8PN-713-21AlternatePDF
8T-713-21AlternatePDF
ASP-752B-45AlternatePDF
ASP-752C-20AlternatePDF
ASP-752C-45AlternatePDF
ASP05-752C-45AlternatePDF
ASP06-752C-45AlternatePDF
ASP08-752B-20AlternatePDF
ASP08-752B-45AlternatePDF
C-751-43OSAlternatePDF
KSPLK12-713-45JDAlternatePDF
LB06-713-58RAAlternatePDF
LB08-352-20AlternatePDF
LGP08-713-21PIAlternatePDF
LGP08-713-43PIAlternatePDF
MG-722-120AlternatePDF
MGL08-752A-21AlternatePDF
MGL08-752A-21SPAlternatePDF
MGL08-752A-21VTAlternatePDF
MGL08-752A-61XLAlternatePDF
MGL68-752A-21AlternatePDF
MGL68-752A-61AlternatePDF
MGLA68-722-21AlternatePDF
MGLC06-752-23AlternatePDF
MGLC68-752A-21AlternatePDF
MGLC68-752A-21LAlternatePDF
MGLC68-752A-61AlternatePDF
MS8-713-20AlternatePDF
SB-204D-27OSAlternatePDF
SB-204D-37OSAlternatePDF
SB-206A-35OSAlternatePDF
SB-713A-58RAAlternatePDF
SB-752B-10AlternatePDF
SB-752B-20FAlternatePDF
SB-752B-80FAlternatePDF
SB-752C-80FAlternatePDF
SB04-206H-27OSAlternatePDF
SB04-751C-54RAAlternatePDF
SB04-752B-43OSAlternatePDF
SB04-752C-20AlternatePDF
SB04-752C-45AlternatePDF
SB05-204D-37OSAlternatePDF
SB05-206H-27OSAlternatePDF
SB05-752A-43OSAlternatePDF
SB05-752B-10AlternatePDF
SB05-752C-20AlternatePDF
SB05-752C-20FAlternatePDF
SB05-752C-45AlternatePDF
SB05-752C-80AlternatePDF
SB05-752C-80FAlternatePDF
SB06-204D-27OSAlternatePDF
SB06-204D-37OSAlternatePDF
SB06-206H-27OCAlternatePDF
SB06-206H-27OSAlternatePDF
SB06-206H-37OCAlternatePDF
SB06-713A-58RAAlternatePDF
SB06-722-120AlternatePDF
SB06-752B-10AlternatePDF
SB06-752B-20AlternatePDF
SB06-752B-20FAlternatePDF
SB06-752B-43OSAlternatePDF
SB06-752B-45AlternatePDF
SB06-752B-80AlternatePDF
SB06-752B-80FAlternatePDF
SB08-204D-37OSAlternatePDF
SB08-206H-27OSAlternatePDF
SB08-713-20AlternatePDF
SB08-713-20CNAlternatePDF
SB08-713-45AlternatePDF
SB08-713-80AlternatePDF
SB08-713A-58RAAlternatePDF
SB08-714-10AlternatePDF
SB08-752B-10AlternatePDF
SB08-752B-20FAlternatePDF
SMLS08-713-20AlternatePDF
SMLS08-752C-20FAlternatePDF
UAB-204D-37OSAlternatePDF
UAB05-204D-37OSAlternatePDF
UAB05-206H-37OSAlternatePDF
UAB06-204D-37OSAlternatePDF
UAB08-204D-37OSAlternatePDF
UAB08-713-58RAAlternatePDF
UAB568-352-21AlternatePDF
UBB-204D-27OSAlternatePDF
UBB-206H-27OSAlternatePDF
UBB-751B-54RAAlternatePDF
UBB-752B-20AlternatePDF
UBB05-204D-27OSAlternatePDF
UBB05-204D-37OSAlternatePDF
UBB05-206H-27OSAlternatePDF
UBB06-204D-27OSAlternatePDF
UBB06-204D-37OSAlternatePDF
UBB06-206A-35OSAlternatePDF
UBB06-206H-27OSAlternatePDF
UBB06-713A-58RAAlternatePDF
UBB06-713B-58RAAlternatePDF
UBB06-752B-45AlternatePDF
UBB06-752B-80AlternatePDF
UBB08-204D-27OSAlternatePDF
UBB08-206A-35OSAlternatePDF
UBB08-206H-27OSAlternatePDF
UBB08-713-20AlternatePDF
UBB08-713-45AlternatePDF
UBB08-713A-58RAAlternatePDF
UBR04-206H-37OCAlternatePDF
UBR08-713-20AlternatePDF
UBR08-752B-43OSAlternatePDF

Would you like to check whether Gage Bilt Pneudraulic Rivet Tool GB713 fits your application?

The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Gage Bilt Pneudraulic Rivet Tool GB713.

✉️ info@hadi.co.il📞 08-9911888

Book a consultation

share:

The right solution starts with a clear brief

Could not find the tool you need?

The HADI product development and engineering team can adapt a tool, product or system to your application.