The FSW17P is a Hydraulic flange spreading tool kit used to separate flange joints for maintenance, Installation, testing and decommissioning. The kit contains a FSW17P spreading wedge Tool, stepped blocks, safety blocks and everything needed to operate the tool safely, The integral pump removes the requirement for a hand pump and hoses making the FSW17P very compact and ideal for use in remote or tight access areas or when abseiling, it is packaged in a robust carry case for easy transport and storage.
The FSW17P:
Requires a minimum flange gap of 6 mm (0.24”)
Spreads the flanges with a parallel action ensuring a full 15 mm Jaw step contact is maintained for safe and stable spreading
The FSW17 produces a maximum spreading force of 163kN (36,644 lbf) when the maximum hydraulic pressure of 700 bar (10,000 PSI) is generated through the integral pump.
A powerful and portable Hydraulic tool, the FSW17P weighs only 8.5 Kg (18.7 lbs) and is the correct hydraulic tool for medium and small sized flange joints that require spreading.
The FSW17P kit is a popular choice for abseilers and tight access areas because the in-built Hydraulic pump removes the need for hoses and an external pump.
The FSW17P tool is design to enter the gap between flanges and force the flange open removing the requirement for traditional rigging equipment and certified anchor points.
It is highly recommended that a minimum of two FSW17P tools are used when spreading flange joints – This allows the operators to control the opening of the flange joint to maintain a parallel gap – this will ensure the tool maintains a secure grip on the flange and prevent pinching the gasket and potential flange face damage.
The FSW17P is actuated by hydraulic pressure that pushes a piston creating a linear force on the internal wedge – the internal wedge then forces the jaws of the tool apart.
Using high pressure hydraulics allows the operator to generate very high spreading forces without the requirement for an external power source.
All RenQuip Spreading Wedge Tools are designed to be used in conjunction with RenQuip Flange Alignment tools.
The Tool is lightweight and portable making it ideal for use in remote locations.
If more force is required, multiple tools can be operated together, or the RenQuip VIPER-28 hydraulic spreading wedge can be selected.
All RenQuip tools are manufactured from the highest quality materials and 100% load tested resulting in highly durable, low maintenance products.
| Maximum Spreading Force | 163kN (36644 lbf) |
| Maximum Pressure from Integral Pump | 700 Bar 10,000 PSI |
| Maximum Spreading Distance (with stepped blocks) | 81 mm (3.19”) |
| Minimum Flange Gap | 6 mm (0.24”) |
| Jaw Width | 66 mm (2.6”) |
| Maximum Wedge Protrusion | 38 mm (1.50”) |
| Tool Weight | 8.5 Kg (18.7 lbs) |
| Tool Dimensions | 76 mm x 155 mm x 440 mm (3.0” x 6.1” x 17.3”) |
| Kit Weight | 13 Kg (28.7 lbs) |
| Kit Dimensions | 580 mm x 340 mm x 180 mm (22.8” x 13.4” x 7.1”) |
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Hydraulic Flange Spreading Wedge Single Tool with Integral Pump Kit RenQuip FSW17P.
The right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.