
The GB722/568 is a pneumatic-hydraulic installation tool intended exclusively for 5/32" and 3/16" HUCKRIMP crimp nuts.
The GB722/568 is a pneumatic-hydraulic installation tool intended exclusively for 5/32" and 3/16" HUCKRIMP crimp nuts. Its crimping action deforms the nut to produce consistent installation loads. The tool provides a 0.300" (7.6 mm) fastener-setting stroke and a rated pull load of 4,770 lb (21.22 kN) at 90 psi (6.2 bar) inlet pressure.
| FASTENER | DIAMETER | STRAIGHT |
|---|---|---|
| NAS4445 | 5/32" | KS05-568-11 |
| NAS4450 | 3/16" | KS06-568-11 |
| GB722/568 installs the listed fasteners | |
|---|---|
| The GB722/568 installation tool is suitable for installing only 5/32” & 3/16” HUCKRIMP (Krimpnuts) with 85 psi (5.9 bar) min. required. |
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Gage Bilt Split-System Rivet Tool GB722/568.
Gage Bilt · Split-System Riveting Tools
Gage Bilt · Split-System Riveting Tools
Gage Bilt · Split-System Riveting Tools
Gage Bilt · Split-System Riveting Tools
Honsel · Cordless Riveting Tools
Kwikbolt · Riveting Accessories and Support Equipment
Kwikbolt · Riveting Accessories and Support Equipment
Honsel · Cordless Riveting Tools
Kwikbolt · Temporary Aerospace Fasteners
Honsel · Cordless Riveting Tools
Kwikbolt · Temporary Aerospace Fasteners
Honsel · Cordless Riveting ToolsThe right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.
This website uses data in accordance with the privacy policy to improve your experience. Continued use of the site constitutes acceptance of the Privacy Policy