The GB51 pneumatic installation tool is designed specifically for the most efficient installation of blind rivets.
The GB51 pneumatic installation tool is designed specifically for the most efficient installation of blind rivets.
The GB51 pneumatic installation tool is designed specifically for the most efficient installation of blind rivets. It will install aluminum fasteners through 3/16" diameter, and through 1/8" diameter fasteners in any material. It weighs only 2.50 lbs. (1.13 kg) and can be operated with one hand. The GB51 Installation tool is 8.36" (212.4 mm) high, has a 0.740” (18.8 mm) stroke and generates a minimum of 1,000 lbs. (4.45 kN) of pull at 90 psi (6.2 bar). It operates on 90 psi – 100 psi (6.2 bar – 6.9 bar) of air pressure, with 90 psi (6.2 bar) providing maximum efficiency. At 90 psi (6.2 bar) of air pressure, the GB51 does not exceed 81.5 dB(A) and consumes 0.29 SCF/cycle (8.21 L/cycle)
| Weight | 2.50 lbs. (1.13 kg) |
|---|---|
| Rated Pull Load | 1,000 lbs. (4.45 kN) of pull at 90 psi (6.2 bar) |
| Stroke | 0.740" (18.8 mm) |
| Width | 5.31" (134.9 mm) |
| Height | 8.36" (212.4 mm) |
| Noise Level | 81.5 dB(A) |
| Warranty | 1 year |
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3C-715B-43 | 3C-715A-54RA | 3C-715A-40OS |
| 1/8 | 4C-715B-43 | 4C-715A-54RA | 4C-715A-40OS |
| 5/32 2 | 5C-715B-43 | 5C-715A-54RA | 5C-715A-40OS |
| 3/16 2 | 6C-715B-43 | 6C-715A-54RA | 6C-715A-40OS |
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3A-715B-43 | 3A-715A-54RA | 3A-715A-40OS |
| 1/8 | 4A-715B-43 | 4A-715A-54RA | 4A-715A-40OS |
| 5/32 2 | 5A-715B-43 | 5A-715A-54RA | 5A-715A-40OS |
| 3/16 3 | 6A-715B-43 | 6A-715A-54RA | 6A-715A-40OS |
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | SMLS04-715B-43 | SMLS04-715A-54RA | SMLS04-715B-40OS |
| 5/32 2 | SMLS05-715B-43 | SMLS05-715A-54RA | SMLS05-715B-40OS |
| 3/16 2 | SMLS06-715B-43 | SMLS06-715A-54RA | SMLS06-715B-40OS |
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | 456MAX-715-43 | 456MAX-715B-54RA | 456MAX-715B-40OS |
| DIA. | STRAIGHT |
|---|---|
| 1/8 | MBC04-715C-43 |
| 5/32 | MBC05-715C-43 |
| 3/16 | MBC06-715C-43 |
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3N-715E-43 | 3N-715A-54RA | 3N-715A-40OS |
| 1/8 | 4N-715E-43 | 4N-715-54RA | 4N-715A-40OS |
| 5/32 4 | 5N-715E-43 | 5N-715-54RA | 5N-715A-40OS |
| 3/16 2 | 6N-715E-43 | 6N-715-54RA | 6N-715A-40OS |
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3N-715E-43 | 3N-715A-54RA | 3N-715A-40OS |
| 1/8 | 4CEA-715E-43 | 4CEA-715-54RA | 4CEA-715-40OS |
| 5/32 | 5CEA-715E-43 | 5CEA-715-54RA | 5CEA-715-40OS |
| 3/16 | 6CEA-715E-43 | 6CEA-715-54RA | 6CEA-715-40OS |
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3N-715E-43 | 3N-715A-54RA | 3N-715A-40OS |
| 1/8 | 4CES-715E-43 | 4CES-715-54RA | 4CES-715-40OS |
| 5/32 | 5CES-715E-43 | 5CES-715-54RA | 5CES-715-40OS |
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 3/32 | 3C-715B-43 | 3C-715A-54RA | 3C-715A-40OS |
| 1/8 | 4C-715B-43 | 4C-715A-54RA | 4C-715A-40OS |
| 5/32 | 5C-715B-43 | 5C-715A-54RA | 5C-715A-40OS |
| DIA. | STRAIGHT | RIGHT ANGLE 1 | OFFSET |
|---|---|---|---|
| 1/8 | 3A-715B-43 | 3A-715A-54RA | 3A-715A-40OS |
| 5/32 | 4A-715B-43 | 4A-715A-54RA | 4A-715A-40OS |
| 3/16 | 5A-715B-43 | 5A-715A-54RA | 5A-715A-40OS |
| GB51 installs the listed fasteners | |
|---|---|
| 1) RIGHT ANGLE NOSE ASSEMBLYS MAY REQUIRE MORE THAN ONE PULL | |
| 2) ALUMINUM ONLY | |
| 3) SELF-PLUGGING ALUMINUM ONLY | |
| 4) ALUMINUM AND STEEL ONLY | |
| *ALL COUNTERSUNK 'C' NOSE ASSEMBLIES MAY BE USED TO INSTALL BOTH UNIVERSAL & COUNTERSUNK HEAD RIVETS | |
| NOTE : THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES |
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Gage Bilt Pneumatic Rivet Tool GB51.
The right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.