Atlas Copco LTV R Angle Shut-off Screwdrivers

Atlas Copco LTV R Angle Shut-off Screwdrivers

The Atlas Copco LTV R family is built for fast, accurate tightening in assembly stations and serial production environments.

Its lightweight construction, durable grip, and low reaction force help keep operation comfortable during long shifts and high-throughput work.

Key Features

• Fast, accurate tightening: The range combines high-speed operation with consistent shut-off performance.
• Angle form factor: The angled design is well suited for access in tight or restricted assembly spaces.
• Lightweight design: The family includes 0.7 kg and 0.8 kg models, while LTV19 models weigh 1.1 kg.
• Low reaction force: The tool design helps reduce operator strain during repeated tightening tasks.
• Multiple drive options: The range includes bit-drive models, socket-drive models, and different drive sizes such as 1/4, 3/8, and 1/4 square drive.
• Standard air connections: Most models use a 1/8 air inlet thread, while LTV19 models use a 1/4 inlet thread, with matching hose recommendations.

Frequently Asked Questions

How do I choose the right LTV R model?
Step 1: Define the torque range required by the application.
Step 2: Match the free speed to the cycle time you need.
Step 3: Choose the correct drive type, such as bit drive or socket drive.
Step 4: Check the air inlet thread and recommended hose size.

What is the difference between faster and slower models?
The main difference is tightening pace.
Some models reach 1,100 or 1,400 rpm, while others run at lower speeds such as 200, 320, or 360 rpm.

Are bit-drive and socket-drive versions both available?
Yes.
The family includes 1/4” female hexagon drive models for bits and square drive models for sockets.
The right choice depends on the fastener setup at the station.

What applications is this family best suited for?
It is well suited for assembly tasks that require a blend of speed, accuracy, and ergonomic handling.
That makes it a strong fit for production lines and repetitive tightening stations.

What should I check for pneumatic setup?
Check the air inlet thread, the recommended hose size, and air consumption.
Most models use a 1/8 inlet with 6 l/s air consumption, while LTV19 models use a 1/4 inlet with 7 l/s air consumption.

When should I choose a shorter model?
Choose a shorter model when space around the joint is limited.
Some SH versions are shorter, such as 243 mm versus 266 mm in standard versions.

What should I verify before ordering?
Verify the exact model designation, torque range, free speed, drive type, and ordering number.