Shut-off impulse pistol grip screwdrivers built for fast, repeatable tightening and strong ergonomics.
Atlas Copco ErgoPulse PTI are shut-off impulse pistol grip screwdrivers designed for industrial assembly where speed, consistency, and productivity matter.
The series combines high performance, short cycle times, and a well-balanced design to support demanding production lines and long operating shifts.
How do I choose the right ErgoPulse PTI model?
Step 1: Define the tightening range and application requirement on your assembly line.
Step 2: Match the model to the torque level needed for the job.
Step 3: Check which handle configuration best fits the work position.
Step 4: Confirm the model suits the cycle time and production demands of the station.
Why choose a shut-off impulse screwdriver instead of a standard screwdriver?
A shut-off impulse screwdriver is designed to support consistent tightening and better control in repetitive assembly tasks.
It is a strong fit for production environments that need speed and repeatability.
What applications is this series best suited for?
This series is suited for industrial assembly lines where fast tightening, good ergonomics, and high productivity are important.
It works well in stations that benefit from a pistol grip tool with short cycle times.
How much maintenance do these tools require?
DuraPulse® technology allows up to 5 times longer use before maintenance is required.
That helps support higher tool availability in production.
What should I know about handling and ergonomics?
The series is built with a well-balanced design, a comfortable grip, and a high power-to-weight ratio.
The new handle shape also supports upside-down use.
Are all models in the series based on the same platform?
Yes, all models belong to the ErgoPulse PTI series and share the same core design approach.
The models differ in their configuration and the tightening range they are intended to cover.
| Model | Bolt size (mm) | square drive (in) | Torque range (Nm) | Torque range (ft lb) | Free speed (r/min) | Weight (kg) | Weight (lb) | Length (mm) | CS distance (mm) | Air consumption (l/s) | Air inlet thread (in) | Ordering No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EP5 PTI19 HR10-MT | M6 | 3/8 | 8-19 | 6-14 | 7300 | 0.9 | 2 | 168 | 23 | 6.5 | 1/4 | 8431038130 |
| EP6 PTI32 HR10-MT | M6-M8 | 3/8 | 16-32 | 12-23 | 8700 | 0.9 | 2 | 168 | 23 | 6 | 1/4 | 8431038140 |
| EP7 PTI55 HR10-MT | M8-M10 | 3/8 | 30-55 | 22-40 | 6500 | 1.2 | 2.5 | 179 | 27 | 10 | 1/4 | 8431038150 |
| EP8 PTI70 HR10-MT | M10 | 3/8 | 40-70 | 29-51 | 6500 | 1.3 | 2.8 | 179 | 27 | 10 | 1/4 | 8431038155 |
| EP9 PTI80 HR13-MT | M10 | 1/2 | 50-80 | 37-59 | 5200 | 1.5 | 3.3 | 191 | 31 | 13 | 1/4 | 8431038160 |
| EP11 PTI100 HR13-MT | M12 | 1/2 | 70-100 | 52-74 | 4200 | 1.7 | 3.7 | 201 | 31 | 14 | 1/4 | 8431038165 |
| EP13 PTI150 HR13-MT | M12-M14 | 1/2 | 85-150 | 63-110 | 4500 | 2.3 | 5 | 201 | 36 | 15 | 3/8 | 8431038170 |
(a) For guidance only – final torque depends on the type of joint, accessories and air pressure
(b) in full-speed mode
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Atlas Copco ErgoPulse PTI Shut-Off Impulse Pistol Grip Screwdrivers.
The right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.