Rent the TorcUP TU-3 hydraulic torque wrench with a 1″ square drive, 412-4,805 Nm range, ±3% accuracy and complete planning specifications.
The TU-3 is a professional square-drive hydraulic torque wrench with a 1″ drive for controlled bolting and break-out work. Its operating range is 412-4,805 Nm (350-3,490 lbf-ft) with ±3% accuracy, making it a focused rental choice when high torque, repeatability and clear technical planning are required.
The patented mono-body housing is machined from a single block of 7075 AQ aluminum to reduce twist and deflection under pressure. Internal torque components use Vascomax®, a material 30% stronger and 15% harder than the industry standard. Independent 360° × 360° swivels support clean hose routing in constrained work areas.
Operate the tool with a suitable hydraulic pump and dual hose rated to 10,000 psi / 681 bar, use impact sockets only, and set operating pressure according to the calibration chart supplied with the tool.
| Model | Square drive | Torque range (lbf-ft) | Torque range (Nm) | Accuracy | Repeatability | Duty cycle | Tool weight (lb / kg) | Height (in / mm) | Length 1 (in / mm) | Length 2 (in / mm) | Radius (in / mm) | Width 1 (in / mm) | Width 2 (in / mm) | Width 3 (in / mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TU-3 | 1″ | 350-3,490 | 412-4,805 | ±3% | 100% | 100% | 10.9 / 4.9 | 5.33 / 135.3 | 6.40 / 162.5 | 8.43 / 214.1 | 1.31 / 33.2 | 2.63 / 66.8 | 3.68 / 93.5 | 5.81 / 147.6 |
Reference values only; consult calibration torque chart provided with tool.
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about TorcUP TU-3 Square Drive Hydraulic Torque Wrench.
The right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.