The latest revolutionary design from RenQuip has produced the worlds most powerful spreading wedge.
The VIPER-28 range of flange spreaders incorporate many ground breaking unique features.
277kN ( 62,272 lbf) spreading force per tool
Spreading distance 124 mm (4.9”)
Jaw tip depth of only 5 mm (0.2”)
Jaw width of only 5 5 mm (2.16”)
VIPER -28 weighs only 5 K g(1 1 lbs)
16 mm (0.63”) j aw s tep
F riction reducing jaw bearing s
S ingle pin tool assembly / disassembly
Si m plified design – less parts
These features combine to produce a product that is first in class in every specification.
The VIPER-28H is a Hydraulic flange spreading tool kit used to separate flange joints for maintenance, Installation, testing and decommissioning. The kit contains a VIPER-28 spreading wedge tool, stepped blocks, safety blocks, stepped safety block, safety Lanyard, hydraulic pump and hose – everything that will be needed to operate the tool safely, it is packaged in a robust carry case for easy transport and storage.
A very powerful and portable Hydraulic tool, the VIPER-28 is the correct hydraulic tool for large and medium sized flange joints but with the benefit of the narrow Jaw tip it can also be used on smaller flanges.
The VIPER-28 hydraulic flange spreader tool is design to enter the gap between flanges and force the flange open removing the requirement for traditional rigging equipment and certified anchor points.
It is highly recommended that a minimum of two VIPER-28 tools are used when spreading flange joints, this allows the operators to control the opening of the flange joint to maintain a parallel gap – this will ensure the tool maintains a secure grip on the flange and prevent pinching the gasket and potential flange face damage.
The VIPER-28 is actuated by hydraulic pressure that pushes a piston creating a linear force on the internal wedge – the internal wedge then forces the jaws of the tool apart.
Using high pressure hydraulics allows the operator to generate very high spreading forces without the requirement for an external power source.
All RenQuip Spreading Wedge Tools are designed to be used in conjunction with RenQuip Flange Alignment tools.
The Tool is lightweight and portable making it ideal for use in remote locations including offshore flange maintenance.
If more force is required greater multiples of tools can be used.
All RenQuip tools are manufactured from the highest quality materials and 100% load tested resulting in highly durable, low maintenance products.
| Maximum Spreading Force | 277kN (62272 lbf) |
| Maximum Applied Pressure | 700 Bar 10,000 PSI |
| Maximum Spreading Distance (with stepped blocks) | 124 mm (4.88”) |
| Minimum Flange Gap | 5 mm (0.20”) |
| Jaw Width | 55 mm (2.16”) |
| Maximum Wedge Protrusion | 39.5 mm (1.56”) |
| Tool Weight | 5 Kg (11.0 lbs) |
| Tool Dimensions | 75 mm x 133 mm x 295 mm (3.0” x 5.2” x 11.8”) |
| Kit Weight | 19 Kg (41.9 lbs) |
| Kit Dimensions | 580 mm x 340 mm x 180 mm (22.8” x 13.4” x 7.1”) |
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Hydraulic Flange Spreader Single Tool and Pump Kit RenQuip VIPER-28H.
The right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.