Floating holders have a significant weakness when used in conjunction with multi-bladed, high-performance reamers. Due to the function and the construction of the floating holder, when the tool initiates the cut at the beginning of the bore, a very low cutting speed must be selected initially.
Floating holders have a significant weakness when used in conjunction with multi-bladed, high-performance reamers. Due to the function and the construction of the floating holder, when the tool initiates the cut at the beginning of the bore, a very low cutting speed must be selected initially.
Floating holders have a significant weakness when used in conjunction with multi-bladed, high-performance reamers. Due to the function and the construction of the floating holder, when the tool initiates the cut at the beginning of the bore, a very low cutting speed must be selected initially. After the machining of the first few millimetres it is then possible to increase the cutting speed, depending on the material and conditions on the machine. The mechanism inside the floating holders for multi-bladed reamers is designed especially for machining using multi-bladed reamers so that the compensation direction, the floating path and the necessary force for deflection are optimal for a specific range of diameters and tools used in the holder. This exact matching is particularly important on starting the cut. As a result high cutting speeds are possible even at the start of the reaming operation.
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about MAPAL Floating Holders for Multi-Bladed Reamers.
The right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.