Three red hydraulic cylinders with metal fittings, two standing upright

בית » מוצרים » Push-pull hydraulic cylinder

Push-pull hydraulic cylinder

Name: Push-pull hydraulic cylinder
Brand: F.P.T. - Fluid Power Technology

Double-acting push-pull hydraulic cylinder from the CDE Series, designed for high-pressure, high-cycle operation.

Push-pull hydraulic cylinder

The CDE Series push-pull hydraulic cylinders are double-acting cylinders built for intensive production, testing and engineering applications. They are suitable for high-cycle use and repeated push and pull operations.

They are designed for high loads, with a wide stroke range and a broad selection of accessories, including eye connectors, flanges, rings and plates. Custom-made configurations are also available on request.

Key Features

Double-acting: The CDE Series is a double-acting hydraulic cylinder series, suitable for both pushing and pulling operations.
High-cycle operation: Designed for intensive production and frequent duty cycles, with long service life in demanding applications.
Safety and eccentric load absorption: The stop ring helps prevent plunger over-stroke and improves operator safety, while supporting eccentric load absorption.
Contamination control: The wiper reduces contamination between the ring and the rod, helping maintain reliable performance in industrial environments.
Accessories and customization: A wide range of accessories is available, such as eye connectors, flanges, rings and plates, along with custom-made production on request.
Applications: Suitable for high-tonnage lifting applications, engineering and testing laboratories, locking systems, heavy industry and production lines.

Frequently Asked Questions

Can we request a custom-made cylinder?
Yes, we will be glad to review custom-made double-acting cylinder production on request, including geometry, performance and accessories.

What is this cylinder suitable for?
It is suitable for push and pull operations, high-load applications, high-cycle production, testing laboratories, industry and locking systems.

Can additional mounting accessories be supplied?
Yes, a wide range of accessories can be supplied, including eye connectors, flanges, rings and plates, depending on the application.

Can we order and receive it in Israel?
Yes, we will be happy to help with ordering and supply in Israel.

Push-pull double-acting cylinders

CAP	STROKE	MODEL	MAX FORCE kN	SECTION cm2	VOLUME cm3	MASS kg	DIMENSIONS (mm)	A	B	C	D	E	F	G	H	L	M	N	P	R	T


5	30	CDE-5/30				2.1	174	204	154												102
5	60	CDE-5/60				2.7	207	267	184												132
5			49.5	22,9	7.1	3.3				49	30	22		M20x1.5	46		M35x1.5	14		M42x1.5	18
5	100	CDE-5/100				3.5	247	347	224												170
5	160	CDE-5/160				4.3	307	467	284												232
8	155	CDE-8/155-SH				6.6	389	548	364												249
8			78	45	11.4	6.5				64	38	25		3/4”-16	38-56	1	11/16″-18	15		2″-12	19
8	257	CDE-8/257-SH				8.4	490	750	465												351
10	60	CDE-10/60				5.7	242	302	224												150
10	100	CDE-10/100				6.5	282	382	264												190
10			111.3	68.2	15.9	9.7				68	45	28		M24x2	56		M48x1.5	16		M60x2	18
10	160	CDE-10/160				8	342	502	324												250
10	260	CDE-10/260				10.5	442	702	424												350
15	159	CDE-15/159-SH				10	389	548	360												252
15			139	70.7	20.3	10.1				76	51	36	1	1/8”-12	54-73	2	3/16″-16	25	2	5/8″-16	25
15	260	CDE-15/260-SH				12.8	490	750	461												353
22	80	CDE-22/80				14	342	422	316												186
22	160	CDE-22/160	232.3	121	33.2	17.3	530.9	582	396	92	65	45		M40x2	89		M70x2	26		M85x2	24
22	260	CDE-22/260				21.5	522	782	496												366
30	260	CDE-30/260	309.3	142.9	44.2	20.4	1148.6	792	504	113	75	55		M50x2	94		M80x2	28		M105x2	24

Dimensions drawing (reference for the table columns)

Would you like to check whether Push-pull hydraulic cylinder fits your application?

The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Push-pull hydraulic cylinder.

✉️ info@hadi.co.il 📞 08-9911888

Book a consultation