AVRO XT300 pneumatic drill for aerospace and sheet-metal work, with the power and air supply data stated by the manufacturer.
AVRO XT300 pneumatic drill for aerospace and sheet-metal work.
The model is listed with 0.4 hp (0.30 kw) power, 1/4” NPT Standard air inlet, and 90 psi (620 kpa) air pressure.
| Model Number | Free Speed | Chuck Capacity | Spindle Thread | Maximum Torque | Length | Weight |
|---|---|---|---|---|---|---|
| 12500 | 22,000 | 1/4 / 6.35 | 3/8 -24 | 0.25 / 0.35 | 6.1 / 155 | 1.8 / 0.80 |
| 12501 | 5,000 | 1/4 / 6.35 | 3/8 -24 | 1.1 / 1.5 | 6.1 / 155 | 1.8 / 0.80 |
| 12502 | 3,000 | 1/4 / 6.35 | 3/8 -24 | 2.8 / 3.8 | 6.1 / 155 | 1.8 / 0.80 |
| 12504 | 800 | 3/8 / 10 | 3/8 -24 | 4.1 / 5.5 | 6.9 / 175 | 2.2 / 1.0 |
| 12505 | 500 | 3/8 / 10 | 3/8 -24 | 7.5 / 10.2 | 6.9 / 175 | 2.2 / 1.0 |
Is the XT300 pneumatic drill suitable for aerospace and sheet-metal work?
Yes, this model is presented as suitable for aerospace and sheet-metal work.
What is the power of the XT300?
According to the specs, the power is 0.4 hp (0.30 kw).
What air inlet does this model require?
According to the manufacturer, the air inlet is 1/4” NPT Standard.
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Pneumatic Drill - AVRO XT300.
The right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.