AVRO XT250PFC pneumatic countersink drill for precise aerospace and sheet-metal work.
The AVRO XT250PFC pneumatic countersink drill is intended for professional use within the AVRO tool line.
It features a standard 1/4″ NPT air inlet, uses a 5/16″ (8 mm) I.D hose, and operates at 90 psi (620 KPA).
| Model Number | Free Speed | Spindle Thread | Maximum Torque | Length | Weight |
|---|---|---|---|---|---|
| 15022PFC | 5,000 | 3/8 -24 | 1.3 / 1.7 | 15.3 / 390 | 5.0 / 2.27 |
| 15023PFC | 3,200 | 3/8 -24 | 2.5 / 3.4 | 15.3 / 390 | 5.0 / 2.27 |
| 15024PFC | 2,400 | 3/8 -24 | 3.3 / 4.5 | 15.3 / 390 | 5.0 / 2.27 |
| 15025PFC | 1,600 | 3/8 -24 | 4.2 / 5.7 | 15.3 / 390 | 5.0 / 2.27 |
| 15026PFC | 1,000 | 3/8 -24 | 5.5 / 7.5 | 15.3 / 390 | 5.0 / 2.27 |
| 15027PFC | 800 | 3/8 -24 | 5.8 / 7.8 | 15.3 / 390 | 5.0 / 2.27 |
| 15028PFC | 500 | 3/8 -24 | 7.5 / 10.2 | 15.3 / 390 | 5.0 / 2.27 |
What is the XT250PFC pneumatic countersink drill used for?
It is intended for professional aerospace and sheet-metal work.
What air inlet does this model have?
It has a standard 1/4″ NPT air inlet.
What hose and air pressure are required?
Use a 5/16″ (8 mm) I.D hose and 90 psi (620 KPA) air pressure.
The HADI Technologies team will help you select the right configuration, verify application requirements and provide technical information about Pneumatic Countersink Drill - AVRO XT250PFC.
The right solution starts with a clear brief
The HADI product development and engineering team can adapt a tool, product or system to your application.